HazLoc ISA100/WirelessHART Gateway

Main Feature
  • Full Mesh topology: robust wireless connectivity from ISA100/ WirelessHART field device coverage to Wi-Fi backbone
  • Perfect triple play infrastructure: video surveillance via high throughput Wi-Fi backbone ensures video transmission without compromising video performance
  • Dual Wi-Fi Mesh path establishes better stability in backbone transmission
  • Wide temperature range, high EMC immunity to Surge, ESD and EFT
  • Suitable for deployment in hazardous environments
  • Incorporates power redundancy (DC and PoE)
  • Distributed network topology provides scalable infrastructure: easy integration and cost saving

NEXCOM NIO 200 is a powerful distributed network topology ISA100.11a access point integrating 802.11n Mesh technology. With ISA100.11a/WirelessHART technology, NIO 200 can establish fully Mesh network to ensure robust and reliable communication for mission-critical industrial wireless applications. The integration of both 802.11n Mesh & ISA100.11a/WirelessHART technology gives a full Mesh infrastructure from field devices to Wi-Fi backbone, thus a concrete wireless connectivity can be assured. It’s designed to meet CID2 and ATEX certified requirement and is perfect solution to critical data monitoring and sensing in oil & gas, chemical plant, etc…

Wireless Radio IEEE802.11a/n x 2, MIMO 2 x 2
IEEE802.15.4, 1 Tx, 1 Rx
Wi-Fi Frequency Ranges USA: 5.15~5.25 GHz, 5.725~5.825 GHz
Europe: 5.15-5.25GHz, 5.47~5.725 GHz
RF Output Power: IEEE 802.11a 802.11a
- 27 dBm with 2 antennas
802.11n (HT20)
- 27 dBm with 2 antennas
802.11n (HT40)
- 27 dBm with 2 antennas
* Note: The available RF output power will be given by certified power in different region
Hardware WAN: 10/100/1000 Base-TX MDI/MDIX
LAN: 10/100/1000 Base-TX MDI/MDIX
Ethernet compliant with:
- IEEE802.3/802.3u
- Hardware based 10/100/1000, full/half, flow control auto negotiation
Push buttons: 1 x reset/restore to default
- 2 x Ethernet
- 2 x 11an radio
- 1 x IWSN radio
- 1 x Power/Status
- 5 x N-type connector for NIO 200IDR/IAG/HAG
- 4 x N-type connector for NIO 200IDG
Safety Compliance UL 60950-1; 60950-22
EN 60950, 2nd edition
IEC 60950, 2nd edition
IEC 61000-4-2 level 4 ESD immunity
IEC 61000-4-5 level 4 AC surge immunity
IEC 61000-4-4 level 4 electrical fast transient burst immunity
Wi-Fi Security (AP Mode) WEP (64/128/152)
WAP/WPA2 mixed
WPA2-personal (PSK+CCMP/AES)
Hidden ESSID support
MAC address filtering (MAC ACL)
Station isolation
* Note: The AP function is to be quipped in 2nd phase stage.
System Management nCare, web GUI management
SNMP V1/V2c/V3
Event log
Syslog information support
Configuration backup and restore
One-button-click to restore factory default setting
Firmware upgrade
SNMP V1/V2c/V3 client
High-Side Communication Interfaces Monitoring and Control System (MCS)
Gateway Services Access Point (GSAP) (only for NIO 200IAG/IDG)
HART-IP (only for NIO 200HAG)
Physical and Power 12~48 VDC PoE (standard PoE 802.3at)
Wall/VESA/Pole mountable (pole mount kit is an optional accessory)
Wall/pole mountable
Dimension: 256mm x 226mm x 91mm
Weight: 2.5Kg
Environment Protection Operating temperature: -40~75°C (altitude : up to 3000m)
Storage temperature: -40~80°C
Humidity: 0% to 95% maximum (non-condensing)
Vibration: random 0.3g
Certification UL 60950-1; 60950-22
Radio approvals
- FCC Part 15.247, 15.407
- EN 300 328
- EN 301 893
EMI and susceptibility
- FCC Part 15.107, 15.109
- EN 301 489-1, -17
Anti-Explosive Certification UL: Class I, Division 2, Groups A, B, C and D, T4
ATEX: Class I, Zone 2; Ex nA II, T4
ISA100 Capabilities Wireless Communication Interface Specifications
Standard IEEE: 802.15.4
Data Rate: 250 kbps
Modulation: Q-PSK
Spread Spectrum: DSSS
RF Output Power: Max +15 dBm
Sensitivity: -95 dBm
Connector: N type
Antenna: 2 dBi@ 2.4GHz
Performance Parameters
NIO 200IAG: 100 field instruments
NIO 200IDG: 200 field instruments, 20 subnets
NIO 200IDR: 50 field instruments
NIO 200HAG: 250 field instruments
Mesh Network Depth: 3 hops
Field Device Join Time: As low as 20 seconds
Reporting Rate:
ISA100: 1, 5, 10, 20, 30 and 60 seconds; 10 devices publishing/second
WirelessHART: 8,16,32 secs and 1-60 minutes; 10 devices publishing/second
Dimension Drawing